Home > Oilhead > Electrical System > Ignition > Coils >

Stick Coil w Harness- BMW R1200C, CL, Montauk; 12 13 7 668 210 / BMW
12 13 7 668 210, 12317668210, coil bmw r1200c, coil bmw r1200cl, coil bmw r1200 montauk, stick coil bmw oilhead, BMW R1200C, BMW R1200CL, BMW R1200 Montauk, stick coil, pencil coil, dual spark, beru, bremi, pulse, bmw 12 13 7 668 210, 12137668210
 
Alternative Views:


Part #: SCoil210

BMW Coil Over Plug, with 1kΩ total resistance Ignition Stick Coil for either cylinder.

Improved design with stainless steel jacket for strength and heat reflection. Supplied complete with vehicle harness and connectors

Sold individually but it is always recommended to replace BOTH coils at the same time of service.

Vehicle Manufacturer: BMW
Application: BMW Oilhead Models
Make/Model: BMW 1200C, R1200C I/M, R1200CL, R1200 Montauk.
Model Years: 2001 - 2004
Manufacturer #: 12 13 7 668 210

(See APPLICATION TABLE tab below to verify vehicle fitment)

Brand: BMW
BMW List Price $207.52
USD Price $207.52

Quantity in Stock:(Out of Stock)

Part #: SCOIL210
Quantity:

Description
Application Table
 
NO warranty is offered when purchasing and replacing one stick coil at a time.

As per BMW Technical Service Bulletin, all coils should be replaced as a complete set for proper ignition function

Installation Guide:
Due to operating time, heat and aging, the spark plug connector becomes brittle.
As a result, the terminal connection becomes loose in the sealing are of the spark plug, which may cause misfiring, etc...
  1. Switch off the IGNITION. Wait for 15 minutes before removing the spark plug coil. This prevents voltage peaks that may damage or destroy the Engine Electronic Control Unit .
  2. Remove the defective coil.
  3. Apply a thin film a dielectric grease to the neck of the spark plug, or the inner part of the rubber sealing boot.
  4. Re-attach the spark plug coil to the spark plug.
  5. Check the primary connector contacts for oxidation and clean if required. Apply dielectric grease for improved continuity and future oxidation prevention.

Related Products
Ignition Hall Effect Trigger Sensor, 6-Pin Rectangular Oval Connector - BMW Oilhead; 12 11 7 673 277 / EnDuraLast Stick Coil Over Plug Removal Tool - BMW Oilhead, Hexhead, K, F & S -Series; 12 13 7 673 248, 83 30 2 153 002 / EnDuraLast Alternator (50 Amp) - K Bike, Oilhead; 12 31 2 306 020 / EnDuraLast
BUY NOW $175.00

Add
BUY NOW $9.99

Add
BUY NOW $199.00

Add
BOSCH Ignition Hall Effect Trigger Sensor, R1100,  R1150, 12 11 7 673 277, 12117673277,  0 232 101 093, 0232101093, 0 232 101 034, 0232101034, BMW R1100 Ignition Hall effect Trigger Sensor, BMW R1150 Ignition Hall effect Trigger Sensor, BMW R1200 Ignition 12 13 7 673 248, 83 30 2 153 002, 12137673248, 83302153002, 12 13 7 715 853, 12 13 7 715 855, 12 13 7 715 856, 12 13 7 715 847, 12 13 7 715 857, 12 13 7 715 858, 12 13 8 520 154, 12 13 8 520 173, 12 13 8 520 174, 12 13 7 715 846, Stick coil removal tool, 12 31 2 305 315, 12 31 2 306 020, 12312305315, 12312306020, alternator, BMW, K, R, 50 Amp, BMW K1 alternator, BMW K75 alternator, BMW K100 alternator, BMW K1100 alternator, BMW R1100 alternator, BMW R1150 alternator, BMW R1200 alternator, BMW K1