Home > Airhead > Custom > Siebenrock > Siebenrock Engine >

Oil Pan Extension - BMW Airhead; 11 13 1 338 427  / Siebenrock
11 13 1 338 427,11131338427,11 13 1 337 330,11131337330,R45 oil pan spacer,R60 oil pan spacer,R65 oil pan spacer,R75 oil pan spacer,R80 oil pan spacer,R90 oil pan spacer,R100 oil pan spacer,R45 oil pan extender,R60 oil pan extender,R65 oil pan extender,R7
 
Part #: OilPanExt427

Oil Pan Extension of 30mm for BMW Airheads - includes hardware, oil screen gasket and installation instructions.

You will need two oil pan gaskets, see: OP-Gasket427 or OP-Gasket427OE

The oil quantity increases by 1.3liters. The additional oil will reduce engine temperature and the reduced number of cycles with reduce wear on the parts and increase the life of the oil. The inner supports also reduces oil movement in the oil pan.

NOTE: Models with a tension spring holder on the center stand require 2 of these springs: StandSpring583. May fit to other models than detailed in the application table with modifications. Typically these modifications would include lowering the to bar on the center stand to allow the stand to be dropped down into it's position and the spring holders relocated due to interference with the oil pan. No modification is required for the models listed in the application table below.

Vehicle Manufacturer: BMW
Application: BMW Airhead Models
Make/Model: BMW R45, R60, R65, R75, R80, R90, R100
Model Years: 1973 - 1996
Manufacturer #: 11 13 1 338 427

(See APPLICATION TABLE tab BELOW to verify vehicle fitment)

Brand :

USD Price $173.50

Quantity in Stock:31

Part #: OILPANEXT427


Oil Pan Gasket 11 13 1 338 427 [Add $6.99]
Oil Pan Gaskets x 2

Oil Pan Gaskets x 2 for Oil Pan Extension 11 13 1 338 427 [Add $13.98]

 Oil Pan Gasket 11 13 1 338 427 Silicone [Add $24.99]
Stand Spring

Add Two Stand Springs 46 52 230 1 583 x 2 [Add $12.50]

Quantity:  
Description
 		Application Table
 
Installation Instructions (Included with the kit)

  • Two oil pan seals are required for the installation.
  • Drain the oil into a suitable container - wait until the oil pan is completely empty and remove it.
  • Clean the sealing surfaces on the engine housing and on the oil sump to remove sealant and sealing compound residues.
  • Remove the oil pan.
  • Insert the original bolts into the oil pan and measure how much of the thread of the original bolts protrude.
  • This projection must be the same when the oil pan is extended with the spacer and the longer bolts are inserted.
  • Choose the correct pair of the provided bolts 60mm, 70mm or 80mm.
  • Now attach the oil pan and spacer with bolts including washers and gaskets. (We recommend applying locking compound "Medium" on the bolts.)
  • Place one oil pan gasket with some sealing compound on the bottom and another oil pan gasket on the top of the extender. Use very small amounts of sealing compound on the gaskets.
  • Now fasten the oil pan with the extender using the hexagon socket bolts and torque to 10Nm.
  • Attach the Oil Pickup Extension with the two gaskets and longer bolts provided.
  • Refill oil plus an additional quantity (approx. 1.3 liters), refer to the oil dipstick for final level.
  • NOTE: One hexagon socket bolt is shorter than the others and measures M6x50. This must be inserted under the oil filter cover when installing "front right" bolt.
  • A longer bolt presses on the outer casing, which causes a loss of oil pressure and would result in considerable engine damage.
  • Some models may require adjustments to the main stand.
Oil Pan Extender Instructions

Related Products
Oil Pan Gasket Silicone - BMW Airhead; 11 13 1 338 427  / EnDuraLast Oil Pan Gasket - BMW Airhead; 11 13 1 338 427  / EnDuraLast Oil Screen Gasket - BMW Airhead Models; 11 41 1 265 258, 11 41 0 552 280 / EnDuraLast Oil Cooler Upgrade Kit - BMW Airhead  / Siebenrock
USD Price $24.99

Add
USD Price $7.99

Add
USD Price $2.75

Add
USD Price $655.00

Add
11 13 1 338 427,11131338427,11 13 1 337 330,11131337330,oil pan gasket,pan gasket,bmw oil pan gasket,airhead oil pan gasket,R45 oil pan gasket,R50 oil pan gasket,R60 oil pan gasket,R65 oil pan gasket,R75 oil pan gasket,R80 oil pan gasket,R90 oil pan gaske 11 13 1 338 427,11131338427,11 13 1 337 330,11131337330,oil pan gasket,pan gasket,bmw oil pan gasket,airhead oil pan gasket,R45 oil pan gasket,R50 oil pan gasket,R60 oil pan gasket,R65 oil pan gasket,R75 oil pan gasket,R80 oil pan gasket,R90 oil pan gaske 11258,11 41 1 265 258,11411265258,R45 Oil screen gasket,R60 Oil screen gasket,R65 Oil screen gasket,R75 Oil screen gasket,R80 Oil screen gasket,R100 Oil screen gasket,R45 Oil pump gasket,R60 Oil pump gasket,R65 Oil pump gasket,R75 Oil pump gasket,R80 Oil R65GS oil cooler,R80GS oil cooler,R80G/S oil cooler,R80GS PD oil cooler,R80ST oil cooler,R100GS oil cooler,R100GS PD oil cooler,R100R oil cooler