5 Speed Gearbox Output Shaft Oil Seal, - BMW R80, R100; 23 12 1 338 514, 23 12 2 471 126 / EnDuraLast

Home > Airhead > Engine & Drivetrain > Gearbox > 5 Speed Gearbox > Gearbox Gaskets >

5 Speed Gearbox Output Shaft Oil Seal, - BMW R80, R100; 23 12 1 338 514, 23 12 2 471 126 / Mark & Swiss

23 12 1 338 514,23121338514,R80GS gearbox output seal,R80GS PD gearbox output seal,R80R gearbox output seal,R80R Mystik gearbox output seal,R100GS gearbox output seal,R100GS PD gearbox output seal,R100R gearbox output seal,R100R Mystik gearbox output seal

Alternative Views:

Part #: GearboxSeal514

Output Shaft Oil Seal on Paralever Models.

SPECIAL NOTE: Install the seal with the side containing the spring is inside the gearbox. No sealant is required on the outside circumference of the seal if the your casing seat is clean and unblemished. Ensure that the rotating flange is clean and dry.

Special BMW Service Information: Pull the flange off the gearbox output shaft and remove the old seal. Seal the notch hole at the 12 o'clock postion with a suitable sealant such as DriBond and install the new seal.

NOTE: The seal provided by BMW can lead to leaks if not correctly installed. We therefore provide a seal with a TRIPLE LIP seal for the ultimate solution - see: GearboxSeal514Plus.

Vehicle Manufacturer: BMW
Application: BMW Airhead Models
Make/Model: BMW R80GS, R80GS PD, R80R, R80R Mystik, R100GS, R100GS PD, R100R, R100R Mystik
Model Years: 1986 - 1996
Manufacturer #: 23 12 1 338 514, 23 12 2 471 126
Dimensions - 70mm x 40mm x 7mm

(See APPLICATION TABLE tab BELOW to verify vehicle fitment)

Brand:

USD Price $24.99

Quantity in Stock:108

Part #: GEARBOXSEAL514

Quantity:

Description

Application Table

You might also examine the following seals for oil leaks:

The Crankshaft seal - see Part # CShaft-Seal342 and BMWSeal-011
The Camshaft seal - see Part #:IGN-OilSeal193 (pre-95) and Part #:IGN-OilSeal086 (95 onwards)