EDL-Coil3.0OHM / Dual Tower Coil for Single Plugged Engines 3.0 Ohms Resistance / EnDuraLast NEW

Home > Airhead > Custom > EME Scrambler >

Premium Quality Dual Tower Ignition Coil - BMW Airhead & Moto Guzzi; 3.0 Ohm; Primary Resistance / EnDuraLast

dyna coil, coil for bmw motorcycle, green coil bmw, 3.0 ohm coil, aftermarket coil for bmw motorcycle, dyna green coil for bmw, r100 coil, r80 coil, r60 coil, r75 coil, r65 coil, r90 coil, coil for 1990 bmw motorcycle, coil for 1991 bmw motorcycle, afterm

Alternative Views:

Part #: EDL-Coil3.0OHM

EnDuraLast 3.0Ω Dual Tower Ignition Coil for Single Plugged Engines, replaces 2 Canister Single Tower Coils.

The optional mounting bracket is recommended. Additional modifications may be required to fit depending on your specific application.

Coil-Bracket or EDL-Bracket (later models)

NOTE: The terminals are not-polarized, so you can connect these either way. The positive side of the coil would be where you may require additional “keyed on” power. The negative side of the coil would be used for the ignition trigger or tach wire.

Vehicle Manufacturer: BMW, Moto Guzzi, and others
Application: Single Plug Ignition Systems; pre-1981 using 3.0Ω resistance coils, also works with aftermarket electronic ignitions.
Make/Model: BMW Airhead & Moto Guzzi
Model Years: BMW - 1970 to 1982 with points or up to 1995 for use with aftermarket electronic ignition system such as EDL-BOIGNS
Resistance: 3.0Ω primary resistance and 13.25kΩ secondary resistance
Inductance: 11.85mH primary and 51H secondary

Part Manufacturer :

USD Price $69.00

Quantity in Stock:226

Part #: EDL-COIL3.0OHM

EDL-Bracket for front of bike coil (later models or dual plugged) [Add $10.00]

Coil Bracket

Coil-Bracket [Add $10.00]

Quantity:

Description

PRODUCT OVERVIEW

These high tech, quality coils are designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. EnDuraLast Coils are made to replace stock coils. These Coils work with point ignitions, aftermarket electronic ignitions and factory electronic ignitions. Before selecting a coil, check the coil primary resistance requirements as specified by the manufacturer of the ignition being used. Our EnDuraLast electronic ignition for Airheads needs to see 3.0Ω from the coils weather you are single or dual plugged (single plugged bikes should use the 3.0 ohm coil, dual plug modified heads will use 2 of the 1.5Ω coils.) Each coil has two towers. One 3.0Ω coil will replace the pair of original Bosch single tower coils.

If you have an Airhead with the transistorized ignition system (post 1981) you would want to use the EnDuraLast 0.7 ohm coil. Although some people choose to use 1.5Ω coil, which also seems to work well.

For direct factory replacement you may care to select the OE coils for your given application.

PRODUCT SPECIFICATION