Dynatek Ignition Booster for Single Points Ignitions. Part #: Dyna-DBR-1

Home > Airhead > Electrical System > Ignition > Ignition Upgrades >

Dynatek Ignition Booster / All Single Points Ignition / Dynatek

ignition booster, dyna dbr-1, dyna dbr1, bmw ignition booster,

Alternative Views:

Part #: Dyna-DBR-1

Dynatek Booster for Single Points Ignition.

Boosts ignition power in your points system. The unique Dyna Ignition Booster improves performance by transforming the usual inconsistent electrical surges into precise bursts of energy to the coil for more thorough and efficient combustion.

Specifications:

Ultra fast spark voltage rise time; 50% faster than points
No more burned points; current reduced to 0.1 amp
Module is unaffected by dirt, moisture, oil or vibration
Extends spark plug life

Vehicle Manufacturer: Any vehicle with single points ignition. BMW Airhead stock single plug per cylinder or dual plug per cylinder conversion compatible.

USD Price $269.99

Quantity in Stock:(Out of Stock)

Part #: DYNA-DBR-1

Quantity:

Description

Dynatek Boosters
Boost ignition power in your points equipped motorcycle.The unique Dyna Ignition Booster improves performance by transforming the usual inconsistent electrical surges into precisely controlled bursts of energy to the coil for more thorough and efficient combustion.

Part # Dyna-DBR-1 for engines with single breaker points

The DYNA Ignition Booster was designed for use with stock or aftermarket coils or combinations of coils that have at least 3.0 Ohms primary resistance.

1. Fasten the clamp to the electronic module using the 4-40 x 5/16 screws and locknuts provided. the clamp and nuts go on the inside of the housing.

2. Attach the module to the frame in the location selected. Cut off excess clamp material.

3. Attach the ground lug (black wire) to a clean ground point. The engine case is recommended, however, a good frame connection can be made if necessary.

4. File the points regardless of their condition, even if new. Leave the condenser connected.

5. Disconnect the points wire from the ignition coil and connect the blue wire from the booster in it's place.

6. Connect the white wire from the booster to the breaker points wire removed in the previous step.

7. Connect the red wire from the booster to the coil terminal that has + 12 volts applied to it when the ignition switch is turned on.

Specifications:

Ultra fast spark voltage rise time; 50% faster than points
No more burned points; current reduced to 0.1 amp
Module is unaffected by dirt, moisture, oil or vibration
Extends spark plug life

Related Products

Contact Points Set, Ignition- BMW Airhead with BOSCH Ignition; 12 11 1 243 969 / NORIS

Points Adjust Tool w/ Feeler Gauge - BMW Airhead; 12 11 1 353 640 / Northwoods Airheads

Spark Plug Wire Set 18 in / 40 cm, 5k; - All BMW Airhead ; 12 12 1 243 453 / EnDuraLast

BUY NOW $9.99

Add

USD Price $29.99

Add

USD Price $26.99

Add