EnDuraLast - K Fuel Pump Hose Kit

Home > Oilhead > Fuel System > Fuel Hoses >

Submersible Fuel Hose BMW K Bike, Oilhead ; 16 12 1 180 040 / EnDuraLast

BMW K Fuel hoses; BMW K Fuel hose; Submersible fuel line hose kit; BMW Fuel tank hoses; BMW fuel tank hose; Ducati fuel hose; Aprilia fuel hose; moto guzzi fuel hose; SAE 30R10; 220 psi fuel line hose; 16121180040

Alternative Views:

Part #: FP-HoseKit

Submersible Flexible Fuel Hose Kit with 2 x 10.5" (165mm) long hoses and 6 clamps

Kit includes: 5/16" ID x 10.5" hose x 2 and hose clamps x 6 Inside
Diameter = 5/16" (7mm - 8mm) - will fit most fuel pumps and fuel filters with hose clamp fittings.
Hose length comprises three sections, namely 3" (75mm) smooth pipe on each end and a corrugated 4.5" (110mm) middle section
Meets SAE 30R10 specifications for submersible fuel line and pressure rated to 220 psi.

Vehicle Manufacturer: BMW, Ducati, Aprilia, Moto Guzzi
Application: Most fuel injected motorcycles.
Make/Model: BMW K Bike and Oilhead Models
Model Years: ALL
Manufacturer #: replaces BMW Part No. 16 12 1 180 040 in most applications.

Brand :

USD Price $15.00

Quantity in Stock:37

Part #: FP-HOSEKIT

Quantity:

Description

Designed for constant contact with fuel on the inside and the outside.

Meets SAE 30R10 specifications for submersible fuel line making it the perfect replacement for many fully immersed applications.

Design allows bending into a U-shape without kinking - can be used in R850/1100/1150, K75/100/1100/1200/1300 bikes and also R1200 series.

Replaces old deteriorated rubber hoses

Higher burst strength for greater reliability and longevity

Corrugate construction for increased articulation

This submersible fuel hose needs to be cut to length for the specific model it is being installed in. Most BMW applications, it is recommended to cut 1.5 inches (38mm ) off each end. Prior to fitment, run both ends of the hoses over the fuel barb once to pre-expand the hose end for easier installation. Recommend taking the fuel pump out of the tank and pre-assemble everything then re-install back into fuel tank.